Difference between revisions of "Other Parts"

From Labpadre Wiki
Jump to navigation Jump to search
(---)
Line 40: Line 40:
 
  Unknown what this  will be  possible transfer or header tank.
 
  Unknown what this  will be  possible transfer or header tank.
 
=== Bulkheads===
 
=== Bulkheads===
  Are being stamp pressed and [[External Links | Tip Tig]] welded ,along with the rest of the Starship components. They are having the Out ring placed over them and then attached with a metal inner ring about 2' thick and 3-4' wide. Presumed to be  the new welding  points for the mating to the outer hull of the ship/tank. [https://forum.nasaspaceflight.com/index.php?action=dlattach;topic=48895.0;attach=1604510;image Inner ring] ~ credited @Bocachicagal
+
  Are being stamp pressed and [[External Links | Tip Tig]] welded ,along with the rest of the Starship components. They are having the Out ring placed over them and then attached with a metal inner ring about 2' thick and 3-4' wide. Presumed to be  the new welding  points for the mating to the outer hull of the ship/tank.
  
 
=== Sir Egglon ===
 
=== Sir Egglon ===

Revision as of 02:03, 1 February 2020

External Parts

Nose cone

Material 307L Stainless

Windows

Fins

Upper

  • 2 Actuating canard fins at the nosecone area

Lower

  • 2 Lower Control Fins nicknamed "Flings"
  • 1.5 megawatts needed per fin

Reaction Control Thrusters

Engines

The Raptor is a full-flow, staged combustion rocket engine powered by cryogenic methane and liquid oxygen (LOX)
Rocket Motors Raptor Raptor
Controlled 3 Gimbaled 3 Non-gimbaled
Style Sea level bells Vacuum Bell
Diameter 1.3 m/4 ft
Height 3.1 m/10.2 ft
Thrust 2 MN/440 klbf

Heat Shields

Internal parts

Sphere

Unknown what this  will be  possible transfer or header tank.

Bulkheads

Are being stamp pressed and  Tip Tig welded ,along with the rest of the Starship components. They are having the Out ring placed over them and then attached with a metal inner ring about 2' thick and 3-4' wide. Presumed to be  the new welding  points for the mating to the outer hull of the ship/tank.

Sir Egglon

Sir Egglon is the first tank that has been created for SN1, consist of 2 bulkheads each with 1 ring attached to them. Stacked together on 7th of January 2020. Size indicates that it will be used for LCH4

Actuators

Lower Fins

  • Direct Driven with Tesla Plaid motors

Internal Batteries

Tesla made Batteries Housed in the upper part of the nosecone.

Control systems